YASKAWA SVC User Manual page 533

Read User Constant
 Description
Reads the specified inverter user constant from the Inverter.
Note: This command is enabled only when the number of transmission bytes is set to 64 bytes.
 Setting Parameters
Name
Sub Command
Inverter User Constant Number
Inverter User Constant Number
Size
 Monitor Parameters
Name
Subcommand Response Code IW0A
Subcommand Status
M-III Sub Command Status
Auxiliary Inverter Alarm Code
Auxiliary Inverter User Con-
stant Number
Auxiliary User Constant
Reading Data 1
Auxiliary User Constant
Reading Data 2
Auxiliary User Constant
Reading Data 3
Auxiliary User Constant
Reading Data 4
Register No. Setting Range
OW0A 0 to 65535
OW3C 0 to FFFFH
OW3D 1 to 4
Setting
Register No.
Range
0 to 65535
IW0B Bit
IW31 Bit
IW33 0 to FFFFH
IW42 0 to FFFFH
IW44 0 to 65535
IW45 0 to 65535
IW46 0 to 65535
IW47 0 to 65535
10.4 Main Commands and Subcommands
10.4.4 Subcommand Details
Remarks
02: Read User Constant
−
−
Remarks
02: Read User Constant
Bit 0 (Command execution
flag)
Bit 3 (Command error com-
pleted status)
Bit 8 (Command execution
completed)
Inverter subcommand processing status
Inverter alarm code
−
−
−
−
−
ON during execu-
tion
ON when an error
occurs during
command pro-
cessing.
OFF during exe-
cution, and ON
when execution
is completed.
10
10-31