10.1 Connection Specifications
10.1
Connection Specifications
The following table provides the specifications required when connecting Inverters through
MECHATROLINK.
Applicable models
Number of Inverters that can be
connected
Transmission cycle
Interface
Self-configuration Function
Others
*1.
Main commands and subcommands can be used.
*2.
Only main commands can be used.
10-2
Item
A1000: S1018 or later using the SI-ET3 Communications Option Card
V1000: S1022 or later using the SI-ET3/V Communications Option Card
4 max.
125 μs, 250 μs, 500 μs, or 1 ms
Fixed parameters (To set application conditions)
Setting parameters (To update references and output data)
Monitor parameters (To update monitored or input data)
Available
Conforms to the MECHATROLINK-III standard inverter profile specifica-
tions (64-byte
Specification
*1
*2
or 32-byte
).