7.3
Setting Motion Parameters
The Definition Tab Page of each Motion Control Function Module displays the motion parame-
ters (fixed parameters, setting parameters, and monitor parameters) that are used to control
motion axes, such as SERVOPACKs, Inverters, and Stepping Motor Drives.
This section describes methods for checking and changing motion parameters.
Refer to the following section for details on motion parameters.
3.4 Motion Parameter Details on page 3-27
7.3.1
Displaying and Setting Motion Parameters
Use the following procedure to display and set motion parameters.
Select View − Work Space from the menu bar.
1.
The Work Space Pane is displayed on the left side of the window.
Click the Expand [+] Button beside each item in the Work Space Pane to display motion
2.
parameters as shown below.
7.3 Setting Motion Parameters
7.3.1 Displaying and Setting Motion Parameters
7
7-19