Select Enable from the Slave synchronous function Box.
5.
Note: You cannot enable this function on a sub CPU.
Click the Link Assignment Tab.
6.
7.
Make the following settings.
No.
Item
ADR
ExADR
VENDOR
DEVICE
PROFILE
BYTE
D
INPUT
SIZE
OUTPUT
SCAN
Station address (fixed)
0
Yaskawa Electric co.
SVC32
Standard I/O
16, 32, 48, or 64 (Set the same value as you set for the master station.)
Not selected (I/O enabled).
First register address in input area
8, 16, 24, or 32 (Set the same value as you set for the master station.)
First register address in output area
High (fixed)
6.6 Slave CPU Synchronization
6.6.3 Setting Procedure
Description
6
6-23