Rep 4.15 Main Drive Motor - Xerox B205 Service Manual

REP 4.15 Main Drive Motor

Parts List on PL 4.6
Removal
1. Switch off the printer, then disconnect the power cord.
2. The Left and Right Side Covers, REP
3. The Front Cover, REP 2.1.
4. The Rear Cover, REP 2.3.
5. The Middle Covers, REP 2.5.
6. Remove the Duplex, REP 4.2.
7. Remove the Main Drive Unit, REP
Repairs / Adjustments
REP 4.15
2.2.
4.17.
8. Remove the Feed and Registration Clutch Assembly and the PWB,
a. Disconnect CN3 from the Joint PWB, then remove the screw.
b. Remove the snap rings and washers from the Clutches, then remove the Feed and
Registration Clutches.
c. Release two latches, then remove the Feed and Registration Clutch Assembly and
the PWB.
CN3
Snap Rings
& Washers
Figure 1 Feed and Registration Clutch / Feeder PWB
July 2019
4-46
Figure
Xerox® B205/B215 Multifunction Printer Service Manual
1:
Screw
Latches
Initial Release