REP 4.1 Main Drive Motor Assembly
Parts List on
PL 1.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Remove Fuser Module
(REP
10.1).
2.
Remove Tray 5
(REP
7.1).
3.
Remove Rear Cover
(REP
14.2).
4.
Remove 24 VDC LVPS Chassis
(REP
5.
Remove BTR1 High Voltage Power Supply
6.
Remove AC Drive PWB
(REP
1.11).
NOTE: Carefully observe position of wiring harnesses for later reinstallation
NOTE: In next step, do not remove small round head screws that appear to secure Main Drive
Motor Assembly to machine.
7.
Remove Main Drive Motor Assembly
Initial issue
DC 3535/2240/1632
WARNING
1.9).
(REP
1.10).
(Figure
1).
2
Disconnect
Connectors
(3)
3
Release Harness
Clips (3) (2 not
shown)
Figure 1 Removing Main Drive Motor Assembly
02/03
4-17
1
Disconnect
Connectors (5)
5
Disconnect HV Wire
4
Remove Hex Head
screws (DO NOT
remove 5 round
head screws)
Repairs and Adjustments
REP 4.1