Rep 10.10 Roller Drive J - Xerox ColorQube 9303 Series Service Manual

REP 10.10 Roller Drive J

Parts List on PL 10.10
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
Use care when working near the drum. The drum can be damaged easily, which will cause
print quality defects.
1. Remove the exit paper path, REP 10.20.
2. Unlock and fully open the stripper gate.
3. Remove the post transfix motor (M4) and gearbox,
ColorQube® 9303 Family
WARNING
GP 14. Disconnect the power cord
WARNING
CAUTION
GP 31.
REP 10.8.
4. Remove the 25T gear and bearing,
February 2013
4-73
Figure 1.
1
Remove the e-clips,
gear and bearing.
Figure 1 Gear removal
Repairs/Adjustments
REP 10.10