Drive Transmission; Main Drive - Xerox Phaser 6128MFP Service Manual

Drive Transmission

Main Drive

Phaser 6128MFP Service Manual
Fuser NCS Sensor Warm-Up
The Fuser Non-Contact Sensor at the center of the Heat Roller loses its accuracy
when the temperature of the sensor itself is below -5° C. Therefore, the sensor is
warmed up when the temperature is below -5° C.
The Main Drive transmits power as shown in the following diagram.
Gear T4
Drive Gear
[ Belt ]
Transfer Belt
Feed Solenoid
Registration Feeder Chute
Imaging Unit Gear 2
[ Drum (K) ]
HSG Xerographics (K)
Main Drive
Gear P2
Gear P3
Gear P4
Gear P5
Paper Feed Drive
Registration Clutch
Feed Gear
[ Registration Roller ]
Rubber Registration Gear
[ Feed Roller ]
Metal Registration Gear
[ Metal Registration Roller ]
Imaging Unit Gear 1
[ Drum (C) ]
HSG Xerographics (C)
HSG Xerographics (M)
Imaging Unit
Theory of Operation
[ Name Of Moving Parts ]
Imaging Unit Gear 2
[ Drum (Y) ]
HSG Xerographics (Y)
[ Drum (M) ]
s6128-036
2-37