Compatible SCPI Commands
Supported SCPI Commands
DISPlay:FORMat SINGle | SPLit
Switches the measurement result display between FULL SCREEN and SPLIT SCREEN.
This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Range
DISPlay:ANNotation:FREQuency ON | OFF
Switches X-axis annotation on or off.
This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
Preset
State Saved
DISPlay:LOGO ON | OFF
Switches the on-screen company logo on or off.
This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
Preset
State Saved
106
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:DISPlay:FORMat SINGle|SPLit
:DISPlay:FORMat?
DISP:FORM SING
FSE, FSP, FSU
SINGle
Saved in instrument state.
SINGle|SPLit
:DISPlay:ANNotation:FREQuency ON|OFF|1|0
:DISPlay:ANNotation:FREQuency?
DISP:ANN:FREQ OFF
DISP:ANN:FREQ?
FSE, FSP, FSU
ON
Saved in instrument state.
:DISPlay:LOGO ON|OFF|1|0
:DISPlay:LOGO?
DISP:LOGO OFF
DISP:LOGO?
FSE, FSP, FSU
ON
Saved in instrument state.