Show Ip Service - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show ip service

Displays the current status of TCP/UDP service ports.
show ip service
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
The display output from this command also includes the service port number.
Examples
-> show ip service
Name
----------------------+-------+---------
ftp
ssh
telnet
udp-relay
http
network-time
snmp
secure_http
output definitions
Name
Port
Status
Release History
Release 6.6.1; command was introduced.
page 29-98
Port Status
21 enabled
22 disabled
23 disabled
67 disabled
80 disabled
123 disabled
161 disabled
443 enabled
Name of the TCP/UDP service.
The TCP/UDP well-known port number associated with the service.
The status of the well-known service port: enabled (port is closed) or
disabled (port is open).
OmniSwitch 6250 CLI Reference Guide
IP Commands
November 2009