Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1131

IP Commands
output definitions (continued)
Operational State
Operation State Reason
Router MAC
Local Proxy ARP
Maximum Transfer Unit
Primary (config/actual)
Release History
Release 6.6.1; command was introduced.
Related Commands
ip interface
show icmp statistics
MIB Objects
alaIpInterfaceTable
alaIpInterfaceName
alaIpInterfaceAddress
alaIpInterfaceMask
alaIpInterfaceAdminState
alaIpInterfaceDeviceType
alaIpInterfaceVlanID
alaIpInterfaceIpForward
alaIpInterfaceEncap
alaIpInterfaceLocalProxyArp
alaIpInterfacePrimCfg
alaIpInterfaceOperState
alaIpInterfaceOperReason
alaIpInterfaceRouterMac
alaIpInterfaceBcastAddr
alaIpInterfacePrimAct
alaIpInterfaceMtu
OmniSwitch 6250 CLI Reference Guide
Indicates whether or not the interface is active (up or down).
Indicates why the operational state of the interface is down:
•
unbound—No device is bound to the interface.
•
device-down—Device bound to the interface is down.
•
admin-down—The admin state of the interface is down.
•
no-such-device—Device does not exist.
•
no-router-mac—No MAC address available for the interface.
Note that Operational State Reason field is only included in the dis-
play output when the operational state of the interface is down.
Switch MAC address assigned to the interface. Note that each interface
assigned to the same VLAN will share the same switch MAC address.
Indicates whether or not Local Proxy ARP is active for the interface
(enabled or disabled). Configured through the
The Maximum Transmission Unit size set for the interface. Configured
through the ip interface
Indicates if the interface is the configured and/or actual primary inter-
face for the device (VLAN, EMP, Loopback). If the actual status is set
to yes and the config status is set to no, the interface is the default inter-
face for the VLAN. Configured through the
Configures an IP interface to enable IP routing on a VLAN. With-
out an IP interface, traffic is bridged within the VLAN or across
connections to the same VLAN on other switches.
Displays ICMP statistics and errors.
November 2009
ip interface
command.
ip interface
command.
command.
page 29-83