Show Ip Interface - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

IP Commands

show ip interface

Displays the configuration and status of IP interfaces.
show ip interface [name | vlan vlan id]
Syntax Definitions
name
vlan_id
Defaults
By default, all IP interfaces are displayed.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
The basic show ip interface command displays information about all configured IP interfaces on the
switch.
•
Use the optional vlan parameter to display a list of interfaces configured for the specified VLAN.
•
Specify an optional interface name to display detailed information about an individual interface.
Examples
-> show ip interface
Total 13 interfaces
Name
--------------------+---------------+---------------+------+-------+--------
EMP
GMRULE
Loopback
client
gbps
if222
ldap_client1
ldap_server1
radius_client3
vlan-2
vlan-23
output definitions
Name
IP Address
OmniSwitch 6250 CLI Reference Guide
The name associated with the IP interface.
VLAN ID (displays a list of IP interfaces associated with a VLAN).
IP Address Subnet Mask
172.22.16.115 255.255.255.0
40.1.1.1 255.255.255.0
127.0.0.1 255.0.0.0
60.1.1.1 255.255.255.0
5.5.5.5 255.255.255.0
30.1.5.1 255.0.0.0
173.22.16.115 255.255.255.0
174.22.16.115 255.255.255.0
110.1.1.101 255.255.255.0
0.0.0.0 0.0.0.0
23.23.23.1 255.255.255.0
Interface name. Generally, this is the name configured for the interface
(e.g., Accounting). Loopback refers to a loopback interface configured
for testing.
IP address of the interface. Configured through the
mand.
November 2009
Status Forward Device
UP NO EMP
DOWN NO vlan 40
UP NO Loopback
DOWN NO vlan 60
DOWN NO vlan 7
UP YES vlan 222
UP YES vlan 173
UP YES vlan 174
UP YES vlan 30
DOWN NO unbound
UP YES vlan 23
ip interface com-
page 29-81