Show Ip Bgp Cluster-List - Dell Z9500 Command Reference Manual

Received from :
1.1.1.2 (3.3.3.1)
Extended Communities :
Related
show ip bgp community
Commands
neighbor maximum-prefix

show ip bgp cluster-list

View BGP neighbors in a specific cluster.
Z9500
Syntax
show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6
unicast] cluster-list [cluster-id]
Parameters
vrf vrf-name
ipv4 multicast
ipv4 unicast
ipv6 unicast
cluster-id
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
450
AS_PATH :
Next-Hop : 1.1.1.2, Cost : 0
Origin IGP, Metric
DMZ-Link Bw: 2000 kbytes*
— views the BGP communities.
(OPTIONAL) Enter the keyword vrf and then the name of
the VRF to view cluster information of BGP neighbors
corresponding to that VRF.
(OPTIONAL) Enter the keywords ipv4 followed by the
keyword multicast to view information related only to ipv4
multicast routes.
(OPTIONAL) Enter the keyword ipv4 followed by the
keyword unicast to view information related only to ipv4
multicast routes.
(OPTIONAL) Enter the keyword ipv6 followed by the
keyword unicast to view information related to only to the
ipv6 unicast routes.
(OPTIONAL) Enter the cluster id in dotted decimal format.
The range is 1 — 4294967295.
EXEC
EXEC Privilege
Description
Added the ipv4 multicast and ipv6 unicast parameters.
Best
0, LocalPref 100, Weight
— controls the number of network prefixes received.
0, internal
Border Gateway Protocol