Show Ip Bgp Filter-List - Dell Z9500 Command Reference Manual

Usage
To view the total number of COMMUNITY attributes found, use the show ip bgp
Information
summary command. The text line above the route table states the number of
COMMUNITY attributes found.
The show ip bgp community command without any parameters lists BGP
routes with at least one BGP community attribute and the output is the same as for
the show ip bgp command output.
Example
Dell#show run extcommunity-list
!
ip extcommunity-list ecl1
permit rt 100:4
permit soo 40:4
Dell#show ip bgp extcommunity-list ecl1
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 192.168.11.5
Status codes: s suppressed, S stale, d dampened, h history, *
valid, > best
Path source: I - internal, a - aggregate, c - confed-external,
r - redistributed
Origin codes: i - IGP, e - EGP, ? - incomplete
Weight Path
*>
172.16.0.2
*>
172.16.0.2
Dell#show ip bgp extcommunity-list ec
% Error: Extended community list does not exist.
Dell#

show ip bgp filter-list

View the routes that match the filter lists.
Z9500
Syntax
show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6
unicast] filter-list as-path-name
Parameters
vrf vrf-name
ipv4 multicast
ipv4 unicast
462
n - network,
Network
55.0.0.0/24
77.0.0.0/24
(OPTIONAL) Enter the keyword vrf and then the name of
the VRF to view route information that matches the filter lists
corresponding to that VRF.
(OPTIONAL) Enter the keyword ipv4 followed by the
keyword multicast to view information related only to ipv4
multicast routes.
(OPTIONAL) Enter the keyword ipv4 followed by the
keyword unicast to view information related only to ipv4
unicast routes.
D - denied, S - stale
Next Hop Metric LocPrf
0 200 i
0 200 i
Border Gateway Protocol