Show Running Config Acl-Vlan-Group; Acl-Vlan-Group - Dell S4810 Reference Manual

|

show running config acl-vlan-group

Display the running configuration of all or a given ACL VLAN group.
Syntax
show running config acl-vlan-group group name
Parameters
group-name
Default None
Command
EXEC
Modes
EXEC Privilege
Command
Version 9.3.
History
(0.0)
Examples The following sample output shows the line-by-line style display when using the
show running-config acl-vlan-group option. Note that no group or access
list names are truncated
Dell#show running-config acl-vlan-group
!
acl-vlan-group Test
member vlan 1-100
ip access-group test in
Dell#show running-config acl-vlan-group
!
acl-vlan-group Test
member vlan 1-100
ip access-group test in

acl-vlan-group

Create an ACL VLAN group.
Syntax
acl-vlan-group {group name}
To remove an ACL VLAN group, use the no acl-vlan-group {group name}
command.
354
| | OUT-L2 ACL
0
Display only the ACL VLAN group that is specified. The
maximum group name is 140 characters.
Introduced on the S4810, S4820T, Z9000 and MXL platforms
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)
| 0 |
Test
0