Organization; Printer Specifications - Xerox DocuPrint N24 Service Manual

Organization

This manual is divided into eight sections. The title
and description of each section of the manual is
as follows:
Section 1 - Service Call Procedures
This section is used to identify a suspected
problem. It contains Call Flow, Initial Actions,
Corrective Actions, and Final Actions. This part of
the service manual should always be used to start
the service call.
Section 2 - Printer Specifications
This section contains all the specifications for the
DocuPrint N24, N32, N40, N3225, and N4025
printers.
Section 3 - Parts Lists
This section contains illustrations of disassembled
subsystems and a listing of the spared parts.
Part names are listed in this section of the manual
even if the part itself is not spared. All the parts
that are spared will have the part number listed.
Parts that are not spared will not have a number
listed.
Section 4 - Repair Procedures
This section contains the instructions for removal,
replacement, and adjustment of the spared parts.
Section 5 - General Procedures
This section contains diagnostic routines,
features/options availability, printer setup
procedures, and a listing of tools, supplies, and
accessories.
Section 6 - Wiring Data
This section contains illustrations of the plug/jack
locations and the routing of power and signal
cables.
Section 7 - Repair Analysis Procedures
This section contains the procedures necessary to
repair failures in the printer. This section also
contains the procedures necessary to
troubleshoot image quality problems.
DocuPrint N24, N32, N40, N3225, and N4025
Section 8 - Options
This section contains the specifications, wiring,
instructions for repairing, troubleshooting, and
parts lists for customer purchased options.
2/2000
vii Product Safety