Rep 2.2 Mbf Feed Roll; Rep 2.3 Tray 1 Turn Roll Clutch Assembly - Xerox DocuPrint N2025 Service Manual

REP 2.2 MBF Feed Roll

Parts List on PL 4.1
Removal
Switch off the power and disconnect the Power Cord.Power Cord.
1. Remove the MBF Assembly (REP 2.1).
2. For the Left Feed Roll, lift the locking tab on the Left MBF Roll Core and slide the core to
the left. Slide the MBF Feed Roll to the left and remove (Figure 1).
3. For the Right Feed Roll, lift the locking tab on the Right MBF Roll Core and slide the core
to the right. Slide the MBF Feed Roll to the right and remove (Figure 1).
Figure 1 MBF Feed Roll Assembly
Replacement
1. Reinstall the components in the reverse order.
NOTE: Arrows of the back side of the feed rolls indicate direction of rotation.
Repair-Adjustment
REP 2.2, REP 2.3
WARNING

REP 2.3 Tray 1 Turn Roll Clutch Assembly

Parts List on PL 4.1
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the MBF Assembly (REP 2.1).
2. Remove MBF Gear Cover (REP 1.8).
3. Disconnect in-line connector P/J124 (Figure 1).
4. Remove the screw that secures the Tray 1 No Paper Sensor Assembly Bracket to the bot-
tom of the Paper handler (Figure 1).
5. Note the harness path, then remove the Turn Roll Clutch harness from the cable clamps
(Figure 1).
6. Remove the E-Ring that secures the Turn Clutch Assembly to the Paper Handler (Figure
1).
7. Remove the Turn Roll Clutch Assembly from the Turn Roll Assembly (Figure 1).
Figure 1 Tray 1 Turn Roll Clutch Assembly
Replacement
1. Reinstall the components in the reverse order.
2. Ensure that the tab on the clutch is positioned on the pin on the Paper Handler.
02/2000
4-12
WARNING
DocuPrint N2025/N2825
Initial Issue