Rep 1.11 Feed Rolls And Retard Pad - Xerox Phaser 3020 Service Manual

REP 1.11 Feed Rolls and Retard Pad

Parts List on PL 3.7 and PL 3.3
Removal
1. Switch Off the Printer and unplug the Power Cord.
2. Remove the Print Cartridge.
3. Remove the following covers:
a. Left and Right Side Covers (REP
b. Rear Cover (REP 1.3).
c. Front Cover (REP 1.1).
d. Top Cover (REP 1.4).
4. Perform the following (Figure 1):
a. Disconnect the Drive Motor connector (1).
b. Remove the inside LSU cover screws (2).
Connector
Figure 1 Motor Connector and LSU Cover Screws (Front View)
Xerox® Phaser® 3020 Printer Service Manual
1.2).
Screw
5. Remove the top LSU Cover screws (2) and the cover
Figure 2 LSU Cover Top Screws (Top View)
6. Remove the Feed Rolls Assembly screws (2) through the bottom of the Printer
June 2014
4-15
(Figure 2).
Screw
(Figure
REP 1.11
3).
Repairs