Table 1-8 Default output rules for different output directions
Output
direction
Console
Monitor
terminal
Log host
Trap buffer
Log buffer
SNMP NMS
Enabling system information display on the console
After setting to output system information to the console, you need to enable the associated display
function to display the output information on the console.
Table 1-9 Enable the system information display on the console:
Operation
Enable the debugging/log/trap
information terminal display function
Enable debugging information terminal
display function
Enable log information terminal display
function
Enable trap information terminal display
function
Make sure that the debugging/log/trap information terminal display function is enabled (use the
terminal monitor command) before you enable the corresponding terminal display function by using
the terminal debugging, terminal logging, or terminal trapping command.
Setting to Output System Information to a Monitor Terminal
System information can also be output to a monitor terminal, which is a user terminal that has login
connections through the AUX, VTY, or TTY user interface.
LOG
Modules
Enabled
allowed
/disable
d
default (all
Enabled
modules)
default (all
Enabled
modules)
default (all
Enabled
modules)
default (all
Disabled
modules)
default (all
Enabled
modules)
default (all
Disabled
modules)
TRAP
Enabled/d
Severity
isabled
warnings
Enabled
warnings
Enabled
informati
Enabled
onal
informati
Enabled
onal
warnings
Disabled
debuggin
Enabled
g
Command
terminal monitor
terminal debugging
terminal logging
terminal trapping
1-9
DEBUG
Enabled/d
Severity
isabled
debugging
Enabled
debugging
Enabled
debugging
Disabled
warnings
Disabled
debugging
Disabled
warnings
Disabled
Description
Optional
Enabled by default.
Optional
Disabled by default.
Optional
Enabled by default.
Optional
Enabled by default.
Severity
debugging
debugging
debugging
debugging
debugging
debugging