Configuring To Output System Information To A Monitor Terminal - H3C S5500-SI Series Operation Manual

Operation Manual – Information Center
H3C S5500-SI Series Ethernet Switches
II. Enabling the display of system information on the console
After configuring to output system information to the console, you need to enable the
associated display function in order to display the output information on the console.
Perform the following configurations in user view to enable the display of system
information on the console:
Enable the monitoring of
system information on the
console
Enable the display of
debug information on the
console
Enable the display of log
information
console
Enable the display of trap
information
console

1.2.2 Configuring to Output System Information to a Monitor Terminal

System information can also be output to a monitor terminal, which is a user terminal
that has login connections through the AUX, VTY, or TTY user interface.
I. Configuring to output system information to a monitor terminal
Follow these steps to configure to output system information to a monitor terminal:
Enter system view
Enable information center
Name the channel with a
specified channel number
Configure
through
information can be output
to a monitor terminal
To do...
terminal monitor
terminal debugging
on the terminal logging
on the
terminal trapping
To do...
system-view
info-center enable
info-center
channel-number
channel-name
the channel info-center
which system channel
{
channel-name }
Chapter 1 Information Center Configuration
Use the command...
Use the command...
channel
name
monitor
channel-number
1-6
Remarks
Required
The monitoring of system
information on
console is enabled
default.
Required
Disabled by default
Optional
Enabled by default
Optional
Enabled by default
Remarks
—
Optional
Enabled by default
Optional
Refer to Table 1-3 for
default channel names
Optional
System information
output to the monitor
|
terminal by default with
channel 1 as the default
channel
the
is