Terminal Monitor - H3C SR6600 Command Reference Manual

Syntax
terminal logging
undo terminal logging
Default
The display of log information on the current terminal is disabled.
Views
User view
Default command level
1: Monitor level
Usage guidelines
To view log information, execute the terminal monitor and terminal logging commands, and then enable
the information center (enabled by default).
The configuration of this command is only valid for the current connection between the terminal and the
device. If a new connection is established, the display of log information on the terminal restores the
default.
Examples
# Disable the display of log information on the current terminal.
<Sysname> undo terminal logging
Info: Current terminal logging is off.

terminal monitor

Use terminal monitor to enable the monitoring of system information on the current terminal.
Use undo terminal monitor to disable the monitoring of system information on the current terminal.
Syntax
terminal monitor
undo terminal monitor
Default
Monitoring of the system information is enabled on the console and disabled on the monitor terminal.
Views
User view
Default command level
1: Monitor level
Usage guidelines
Configure the terminal monitor command before you can display the log, trap, and debug information.
The undo terminal monitor command automatically disables the monitoring of log, trap, and debug
information.
The configuration of this command is only valid for the current connection between the terminal and the
device. If a new connection is established, the monitoring of system information on the terminal restores
the default.
230