Table of Contents
Advertisement
To set the global maximum number of portal users:
Step
1.
Enter system view.
2.
Set the global maximum
number of portal users.
Setting the maximum number of portal users on an interface
If you set the maximum number smaller than the current number of portal users on an interface, this
configuration still takes effect. The online users are not affected but the system forbids new portal
users to log in from the interface.
To set the maximum number of portal users on an interface:
Step
1.
Enter system view.
2.
Enter interface view.
3.
Set the maximum number
of portal users.
Enabling strict-checking on portal authorization information
IMPORTANT:
The user profile feature fails temporarily when an active/standby MPU switchover finishes, and it
resumes after user information synchronization completes between the global active MPU and
service modules. You can use the display device command or check the LEDs on cards to see
whether an active/standby MPU switchover finishes. For more information about the display device
command, see device management commands in Fundamentals Command Reference.
About strict-checking on portal authorization information
The strict checking mode allows a portal user to stay online only when the authorized information for
the user is successfully deployed on the interface.
You can enable strict checking on authorized ACLs, authorized user profiles, or both. If you enable
both ACL checking and user profile checking, the user will be logged out if either checking fails.
An ACL/user profile checking fails when the authorized ACL/user profile does not exist on the device
or the ACL/user profile fails to be deployed.
Enabling strict checking on portal authentication information on an interface
Step
1.
Enter system view.
2.
Enter interface view.
Command
system-view
portal max-user max-number
Command
system-view
interface interface-type
interface-number
portal { ipv4-max-user |
ipv6-max-user } max-number
Command
system-view
interface interface-type
interface-number
315
Remarks
N/A
By default, no limit is set on the
global number of portal users.
Remarks
N/A
N/A
By default, no limit is set on the
number of portal users.
Remarks
N/A
N/A
Advertisement
Table of Contents
Troubleshooting
