Pim Commands; Pim-Dm Commands; Ip Pimdm - Dell Force10 S2410-01-10GE-24P Command Reference Manual

PIM Commands

This chapter contains the following major sections:
•
•

PIM-DM Commands

This section provides Protocol Independent Multicast–Dense Mode (PIM-DM) command syntax. The
commands are:
•
•
•
•
•
•
•

ip pimdm

This command enables the administrative mode of PIM-DM in the router.
[oe] aduda,.,
Syntax
The oe version of this command disables the administrative mode of PIM-DM in the router. IGMP
must be enabled before PIM-DM can be enabled.
Default
disabled
Mode Global Config
Command
Version 2.5.2
History
Version 2.5.1
PIM-DM Commands on page 485
PIM-SM Commands on page 488
ip pimdm on page 485
ip pimdm mode on page 486
ip pimdm query-interval on page 486
show ip pimdm on page 486
show ip pimdm interface on page 487
show ip pimdm interface stats on page 487
show ip pimdm neighbor on page 488
Note:
The PIM-DM feature was available in SFTOS before version 2.5.1, but the commands
were not tested in either 2.5.1 or 2.5.2, so the commands in this section are not supported.
Unsupported: not tested in 2.5.2
Unsupported: not tested in 2.5.1
26
PIM Commands | 485