Table of Contents
Advertisement
3. Follow the procedure listed in
Cable routing for Intel GPU Configurations
Figure 71. 4 x 2.5-inch Backplane cable connections on the system board for Intel GPU Configurations
NOTE:
Make sure you route the SL15_CPU1_PB8 cable via processor 1 turtle shell.
Order
1
2
3
Figure 72. Fan cables connection from the fan board of the Storage tray to the PDB of the bottom layer for the Intel
GPU configurations
After working inside your
From
MB-SL6_CPU2_PA3 (signal connector
on system board)
MB-SIG_PWR_1 (system board power
connector)
MB-SL15_CPU1_PB8 (signal connector
on system board)
system.
Installing and removing system components
To
BP-BP_DST_PA1 (backplane signal
connector )
BP-BP_PWR_1 (backplane power
connector)
BP-BP_DST_PB1(backplane signal
connector)
103
Advertisement
Table of Contents
