Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual page 107

Copyright © 2010, Juniper Networks, Inc.
systemName (up to 4 bytes) slot (2 bytes) port (1 byte) 0 (8 bytes)
In the case of PPP terminated from LNS, the Calling-Station-Id attribute is the value
passed as the calling-station AVP.
fixed-adapter-embedded—Formats calling number AVP to use a fixed format of up
to 15 characters consisting of all ASCII fields with a 1-byte slot field, 1-byte adapter field,
and 1-byte port field:
Format for ATM interfaces:
systemName (up to 4 bytes) slot (1 byte) adapter (1 byte) port (1 byte)
VPI (3 bytes) VCI (5 bytes)
Format for Ethernet interfaces:
systemName (up to 4 bytes) slot (1 byte) adapter (1 byte) port (1 byte)
VLAN (8 bytes)
Format for serial interfaces:
systemName (up to 4 bytes) slot (1 byte) adapter (1 byte) port (1 byte)
0 (8 bytes)
For E120 and E320 routers, adapter is the number of the bay in which the I/O adapter
(IOA) resides, either 0 (representing the right IOA bay on the E120 router and the
upper IOA bay on the E320 router) or 1 (representing the left IOA bay on the E120
router or the lower IOA bay on the E320 router). For ERX7xx models, ERX14xx models,
and ERX310 routers, which do not use IOAs, adapter is always shown as 0.
Slot numbers 0 through 16 are shown as ASCII characters in the 1-byte slot field.
fixed-adapter-new-field—Formats calling number AVP to use a fixed format of up to
17 characters consisting of all ASCII fields with a 2-byte slot field, 1-byte adapter field,
and 2-byte port field:
Format for ATM interfaces:
systemName (up to 4 bytes) slot (2 bytes) adapter (1 byte) port (2 bytes)
VPI (3 bytes) VCI (5 bytes)
Format for Ethernet interfaces:
systemName (up to 4 bytes) slot (2 bytes) adapter (1 byte) port (2 bytes) VLAN (8
bytes)
Format for serial interfaces:
systemName (up to 4 bytes) slot (2 bytes) adapter (1 byte) port (2 bytes)
0 (8 bytes)
For E120 routers and E320 routers, adapter is the number of the bay in which the IOA
resides, either 0 or 1. For ERX7xx models, ERX14xx models, and ERX310 routers, which
do not use IOAs, adapter is always shown as 0.
Slot numbers 0 through 16 are shown as integers in the 2-byte slot field.
include-agent-circuit-id—Formats calling number AVP to include only the
agent-circuit-id suboption
Chapter 2: A Commands
63