Aaa Subscriber Limit Per-Port - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
aaa subscriber limit per-port
Syntax
Release Information
Description
Options
Mode
58
aaa subscriber limit per-port interfaceSpecifier limitValue
no aaa subscriber limit per-port interfaceSpecifier
Command introduced before JunosE Release 7.1.0.
Sets the maximum number of active subscribers permitted on the specified port. The no
version returns the limit to the default, 0 (zero).
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
limitValue—Maximum number of subscribers; default value is 0 (zero), which means
there is no limit on the number of subscribers
Global Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
