aaa tunnel ignore
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
aaa tunnel ignore { nas-port | nas-port-type } { enable | disable }
no aaa tunnel ignore { nas-port | nas-port-type }
Command introduced before JunosE Release 7.1.0.
Specifies whether to use the tunnel peer's NAS-Port [5] and NAS-Port-Type [61]
attributes. The no version negates the command or restores the default of enable.
nas-port—Configures the tunnel peer's supplied nas-port value
nas-port-type—Configures the tunnel peer's supplied nas-port-type value
enable—Implements the feature; this is the default setting
disable—Disables the feature
Global Configuration
Chapter 2: A Commands
69