Aaa Accounting Commands - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

aaa accounting commands

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
aaa accounting commands level { default | listName } stop-only tacacs+
no aaa accounting commands level listName
Command introduced before JunosE Release 7.1.0.
Enables AAA accounting for TACACS+ to be captured for a specific user privilege level
and creates accounting method lists. The no version deletes the accounting method list.
level—Privilege level of user commands for which accounting information is captured;
in the range 0–15
default—Specifies that the default method list is used to specify how accounting is
performed
listName—Named method list used to specify how accounting is performed
stop-only—Sends a stop accounting notice at the end of a process
Global Configuration
Chapter 2: A Commands
23