Isis Priority - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

isis priority

isis priority value [ level-1 | level-2 ]
Syntax
no isis priority [ level-1 | level-2 ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the priority of this router for designated router election. The no version
Description
resets priority to the default value, 64.
Options
Interface Configuration, Subinterface Configuration
Mode
value—Number in the range 0–127; the priority of a router; default value is 64
level-1 Sets the priority of a router for level 1 independently
level-2 Sets priority of a router for level 2 independently
Chapter 10: I Commands
1117
isis priority