Table of Contents
Advertisement
3 Startup Procedure and Test Run
10.
When you are done setting the time, push
The procedure for setting the date and time is complete.
■
Disable the Initial Setup Screen
Do the steps in this procedure to not show the initial start-up screen when the drive is energized.
1.
Push
(Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for
2.
Push
(Menu).
3.
Push
/
to select [Initial Setup], then push
4.
Push
/
to select [Show Initial Setup Screen], then push
5.
Push
/
to select [No], then push
• [No]: The keypad will not show the Initial Setup Screen when the drive is energized.
• [Yes]: The keypad will show the Initial Setup Screen when the drive is energized.
■
Start Data Logging
The data log function keeps a record of a maximum of 10 drive monitors. The procedure in this section shows
how to start logging data.
1.
Make sure that a microSD card is inserted in the keypad.
150
.
, push
(Back), and then push
.
.
YASKAWA ELECTRIC SIEP C710617 19A YASKAWA AC Drive CR700 Technical Manual
to show [Home].
.
Advertisement
Table of Contents
