Toyota Tundra 2005 Service - Repair - Maintenance page 3610

Hide thumbs Also See for Tundra 2005:

Table of Contents

INSTALLATION

_ Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension

diagram. (See the body dimension diagram)

_ Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the

_ After welding, apply the polyurethane foam to the corresponding parts.

_ After welding, apply body sealer and under-coating to the corresponding parts.

_ After applying the top coat layer, apply anti-rust agent to the inside of the necked section structural weld spots.

Before temporarily installing the new parts, apply body sealer to the windshield header panel, roof panel rein-

forcement and back window upper frame.

Apply just enough sealer for the new parts to make contact.

BODY PANEL REPLACEMENT