Toyota Tundra 2005 Service - Repair - Maintenance page 3631

Three-dimensional
distance
Two-dimensional Center-to-center
Horizontal distance
distance
in forward / rearward
Vertical distance
in center
Imaginary Standard Line
BODY DIMENSIONS
GENERAL INFORMATION
Center-to-center
straight-line
1.
distance
(a) There are two types of dimensions in the diagram.
(b) In cases in which only one dimension is given, left and right
(c) The dimensions in the following drawing indicate actual dis-
Vertical distance
in lower surface
BASIC DIMENSIONS
(1) (Three-dimensional distance)
_
Straight-line distance between the centers of two
measuring points.
(2) (Two-dimensional distance)
_
Horizontal distance in forward/rearward between the
centers of two measuring points.
_
The height from an imaginary standard line.
are symmetrical.
tance. Therefore, please use the dimensions as a refer-
ence.
DI-1