Toyota Tundra 2005 Service - Repair - Maintenance page 3606

Hide thumbs Also See for Tundra 2005:

Table of Contents

INSTALLATION

_ Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension

diagram. (See the body dimension diagram)

_ Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the

_ After welding, apply the polyurethane foam to the corresponding parts.

_ After welding, apply body sealer and under-coating to the corresponding parts.

_ After applying the top coat layer, apply anti-rust agent to the inside of the necked section structural weld spots.

Take care not to damage the internal reinforcement.

30 mm (1.18 in.)

BODY PANEL REPLACEMENT