HINT:
1)
Prior to applying body sealer, clean the area with a rag soaked in grease, wax and silicone remover.
2)
If weld-through primer was used, first wipe off any excess and coat with anti-corrosion primer before applying
body sealer.
3)
Wipe off excess body sealer with a rag soaked in a grease, wax and silicone remover.
4)
If body sealer is damaged by peeling, cracks, etc., be sure to repair as necessary.
Flat Finishing
1.
ENGINE COMPARTMENT
PAINT
BODY PANEL SEALING AREAS
_
COATING
No Flat Finishing
PC-1
F16904