Toyota Tundra 2005 Service - Repair - Maintenance page 3632

DI-2
Body Looseness
Pointer Looseness
Pointer
Master Gauge
Wrong
Pointer
BODY DIMENSIONS
2. MEASURING
Plate Looseness
(a) Basically, all measurements are to be done with a tracking
gauge. For portions where it is not possible to use a track-
ing gauge, a tape measure should be used.
(b) Use only a tracking gauge that has no looseness in the
body, measuring plate, or pointers.
HINT:
1)
Correct
2)
3)
4)
(c) When using a tape measure, avoid twists and bends in the
tape.
The height of the left and right pointers must be equal.
Always calibrate the tracking gauge before measuring
or after adjusting the pointer height.
Take care not to drop the tracking gauge or otherwise
shock it.
Confirm that the pointers are securely in the holes.