Toyota Tundra 2005 Service - Repair - Maintenance page 3602

Hide thumbs Also See for Tundra 2005:

Table of Contents

INSTALLATION

_ Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension

diagram. (See the body dimension diagram)

_ Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the

_ After welding, apply the polyurethane foam to the corresponding parts.

_ After welding, apply body sealer and under-coating to the corresponding parts.

_ After applying the top coat layer, apply anti-rust agent to the inside of the necked section structural weld spots.

Inspect the fitting of the front door and rear door, etc., before welding, since this affects the appearance of the

BODY PANEL REPLACEMENT