Snmp-Server Location - Dell C9000 Series Reference Manual

4
5
Related
snmp-server enable traps
Commands
snmp-server community

snmp-server location

Configure the location of the SNMP server.
C9000 Series
Syntax
snmp-server location text
To delete the SNMP location, use the no snmp-server location command.
Parameters
text
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
Example
Dell(conf)#snmp-server location MAA_LAB
Dell(conf)#do show running-config snmp
!
snmp-server community public ro
snmp-server location MAA_LAB
Enable traps.
Configure a host to receive informs.
— enables SNMP traps.
— configures a new community SNMPv1 or SNMPv2c.
Enter an alpha-numeric text string, up to 55 characters long.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Simple Network Management Protocol (SNMP) and Syslog 2060