Default Logging Buffered - Dell C9000 Series Reference Manual

Defaults none
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.5(0.0)
Example
Dell(conf)#clear logging auditlog
Related show logging auditlog
Commands

default logging buffered

Return to the default setting for messages logged to the internal buffer.
C9000 Series
Syntax
default logging buffered
Defaults size = 40960; level = 7 or debugging
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
7.6.1.0
7.5.1.0
Related logging buffered
Commands
Description
Introduced on the Z9500.
Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
— displays audit log
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S-Series.
Introduced on the C-Series.
— sets the logging buffered parameters.
Simple Network Management Protocol (SNMP) and Syslog 2070