Keithley 4200A-SCS Reference Manual page 331

Section 6: Clarius Model 4200A-SCS Parameter Analyzer Reference Manual
You can change the configuration to source AC voltage to CVL1 and DC source voltage to CVH1
while measuring AC current at CVH1, as shown in the following figure.
Figure 242: AC source applied to CVL1 and DC source applied to CVH1
Another configuration sources AC drive voltage to the CVH1 terminal and sources DC bias voltage to
the CVL1 terminal. AC current is measured at CVL1.
Figure 243: ACV source applied to CVH1 and DC bias applied to CVL1
The following settings source AC drive voltage and DC bias voltage to the CVL1 terminal. AC current
is measured at CVH1.
Figure 244: ACV source and DCV bias applied to CVL1
6-62 4200A-901-01 Rev. C / February 2017