Operation Mode (Pmu) - Keithley 4200A-SCS Reference Manual

Hide thumbs Also See for 4200A-SCS:

Table of Contents

Model 4200A-SCS Parameter Analyzer Reference Manual

Section 6: Clarius

Operation Mode (PMU)

The operation mode determines what type of test is run on the terminal. Selecting the appropriate

mode simplifies configuration options.

A Pulse Sweep and Pulse Step function are identical. However, in a test where two or more PMUs

are used, the sweep for one PMU is performed on each step of the pulse step of the other PMU. A

pulse step requires that at least one channel be configured for Pulse Sweep.

A Pulse Train outputs one or more pulses of the same magnitude and base level.

When there are two or more PMUs in the test system, the

Sweep Master

(on page 6-105) option is

used to select one of them as the master PMU.

Figure 245: Pulse operation modes

4200A-901-01 Rev. C / February 2017