Setting Up Channels And Traces - Agilent Technologies ENA Series User Manual

Setting Up Channels and Traces

Up to nine channels can be set up with the E5070/E5071A. In each channel, up to nine
traces can be drawn. Thus, up to 81 traces can be drawn on the screen. Each channel has its
own channel window, and the traces appear in the channel windows (each channel has a
1-to-1 relationship with a channel window).
Figure 3-1 Channels and Traces
NOTE Executing measurement of a channel does not depend on the channel's display status. You
can even perform measurement of a channel with no display. See Chapter 5, "Making
Measurements," on page 121 for details on the setup of measurement execution by each
channel.
The traces actually measured are set by the number of traces in each channel. See "Number
of Traces and Arrangement" on page 57 for how to set up the traces.
Chapter 3
Setting Measurement Conditions
Setting Up Channels and Traces
53