Time Gate Level (Option 1D6 Only) - Agilent Technologies ESA Series User's/Programmer's Reference

0.3 µ s to 429 seconds
Range:
Default Unit: seconds
Front Panel
Access: Sweep, Gate Setup, Edge Setup, Gate Length

Time Gate Level (Option 1D6 Only)

[:SENSe]:SWEep:TIME:GATE:LEVel HIGH|LOW
[:SENSe]:SWEep:TIME:GATE:LEVel?
Selects the level of the gate signal; this command is for LEVel triggering only.
Factory Preset
and *RST: High
Front Panel
Access:
Sweep, Gate Setup, Level Setup
Time Gate Polarity (Option 1D6 Only)
[:SENSe]:SWEep:TIME:GATE:POLarity NEGative|POSitive
[:SENSe]:SWEep:TIME:GATE:POLarity?
Selects the polarity of the gate signal; this command is for EDGE triggering only.
Factory Preset
and *RST: Positive
Front Panel
Access:
Sweep, Gate, Edge Gate, Slope Pos Neg
Preset Time Gate (Option 1D6 Only)
[:SENSe]:SWEep:TIME:GATE:PRESet
Presets the time-gated spectrum analysis capability.
Remarks: This command resets gate parameters to default values:
Gate trigger type = edge
Gate polarity = positive
Gate delay = 1 µ s
Gate length = 1 µ s
Gate level = high
Chapter 5
Remote Command Reference
[:SENSe]:SWEep Subsection
343