Using Modules
CA U TI O N
Agilent 8163A/B, 8164A/B, and 8166A/B User's Guide, Fourth Edition
• that you do not attempt to lift the instrument alone, at least two
people are needed to carry the instrument,
• that your back is straight and you bend your legs rather than your
spine,
• that the load is as close to your body as possible,
• when carrying, you never arch your spine backwards, and
• that you can cope with the weight of your load.
Using Modules
How to Fit and Remove Modules
You can use two types of module:
• Front-loadable modules - these modules fit in the four module slots
at the front of the Agilent 8164A/B Lightwave Measurement System
or the two module slots at the front of the Agilent 8163A/B
Lightwave Multimeter System or the 17 module slots at the front of
the Agilent 8166A/B Lightwave Multichannel System.
• Back-loadable modules - these tunable laser source modules fit in
the large module slot at the rear of the Agilent 8164A/B Lightwave
Measurement System.
How to Remove a Front-Loadable Module
Do not use the electrical or optical connectors to pull the module out
of the instrument, as this can cause damage to the connectors.
Make sure that the line power is switched off before you remove a
module.
Installation and Maintenance
283