Defining the Power-On/Preset Conditions
You can set the NFA so that it returns to a user-defined state upon
power-up and preset. The power-up and preset conditions can be
different if required.
Setting the Power On Conditions
Step 1. Press the
System
Step 2. Press the
Power On/Preset
Step 3. Set
Power On
'Last' means that the instrument, upon power-up returns to the state it
was in when it was powered off.
'Preset' means the instrument returns to its defined preset state.
Setting the Preset Conditions
You can set the NFA to return to its factory default state or a user
defined state upon preset.
To set the preset conditions to factory default
Step 1. Press the
System
Step 2. Press the
Power On/Preset
Step 3. Enable the
To set the preset conditions to user defined
Step 1. Configure the NFA to the desired state.
Step 2. Press the
System
Step 3. Press the
Power On/Preset
Step 4. Enable the
Step 5. Press the
Save User Preset
Chapter 4
Defining the Power-On/Preset Conditions
front panel key.
menu key.
to
or
Power On(Last)
front panel key.
menu key.
menu key.
Preset(Factory)
front panel key.
menu key.
menu key.
Preset(User)
menu key to save the current NFA state.
Performing System Operations
as required.
Power On(Preset)
69