Pin States - Hitachi H8S/2199 Hardware Manual

Single-chip microcomputer

Table of Contents

Pin States

Table 10.10 shows the port 2 pin states in each operation mode.

Table 10.10 Port 2 Pin States

Note: Because the SYNCI, SCL0, SDA0, SCL1, and SDA1 always function, the alternative pin

need always be set to the high or low level regardless of active mode or low power

consumption mode.

If the SCK1, and SI1 input pins are set, the pin level needs be set to the high or low level

regardless of the active mode and low power consumption mode. Note that the pin level

must not reach an intermediate level.

Rev. 1.0, 02/00, page 203 of 1141