Flash Memory Writer Mode; Writer Mode Setting; Socket Adapters And Memory Map - Hitachi H8S/2199 Hardware Manual

7.8

Flash Memory Writer Mode

7.8.1

Writer Mode Setting

Programs and data can be written and erased in writer mode as well as in the on-board
programming modes. In writer mode, flash memory read mode, auto-program mode, auto-erase
mode, and status read mode are supported with these device types. In auto-program mode, auto-
erase mode, and status read mode, a status polling procedure is used, and in status read mode,
detailed internal signals are output after execution of an auto-program or auto-erase operation.
7.8.2

Socket Adapters and Memory Map

In writer mode, a socket adapter is mounted on the writer programmer. The socket adapter
product codes are listed in table 7.8.
Figure 7.15 shows the memory map in writer mode.
Table 7.8 Socket Adapter Product Codes
Product Codes
HD64F2199
Package
112-pin QFP
H8S/2199
MCU mode
H'000000
On-chip ROM area
H'47FFF
Figure 7.15 Memory Map in Writer Mode
Socket Adapter Product Code
TBD
Writer mode
H'00000
H'47FFF
Rev. 1.0, 02/00, page 157 of 1141