Hitachi H8S/2199 Hardware Manual page 211

10.3.4 Pin States
Table 10.7 shows the port 1 pin states in each operation mode.
Table 10.7 Port 1 Pin States
Pins Reset
P17/TMOW High-
P16/,& impedance
P15/,548
to
P10/,543
Note: If the ,& input pin and ,548 to ,543 input pins are set, the pin level need be set to the high
or low level regardless of the active mode and low power consumption mode. Note that the
pin level must not reach an intermediate level.
Active Sleep
Operation Holding
Standby Watch
High- High-
impedance impedance
Rev. 1.0, 02/00, page 197 of 1141
Subactive Subsleep
Operation Holding