Hitachi H8S/2199 Hardware Manual page 150

Bit 3    Erase-Verify (EV1): Selects erase-verify mode transition or clearing. Do not set the
SWE1, ESU1, PSU1, PV1, E1, or P1 bit at the same time.
Bit 3
EV1 Description
0 Erase-verify mode cleared
1 Transition to erase-verify mode
[Setting condition]
Setting is available when FWE = 1 and SWE = 1 are selected
Bit 2    Program-Verify (PV1): Selects program-verify mode transition or clearing. Do not set
the SWE1, ESU1, PSU1, EV1, E1, or P1 bit at the same time.
Bit 2
PV1 Description
0 Program-verify mode cleared
1 Transition to program-verify mode
[Setting condition]
Setting is available when FWE = 1 and SWE = 1 are selected
Bit 1    Erase (E1): Selects erase mode transition or clearing. Do not set the SWE1, ESU1, PSU1,
EV1, PV1, or P1 bit at the same time.
Bit 1
E1 Description
0 Erase mode cleared
1 Transition to erase mode
[Setting condition]
Setting is available when FWE = 1, SWE = 1, and ESU = 1 are selected
Bit 0    Program (P1): Selects program mode transition or clearing. Do not set the SWE1, PSU1,
ESU1, EV1, PV1, or E1 bit at the same time.
Bit 0
P1 Description
0 Program mode cleared
1 Transition to program mode
[Setting condition]
Setting is available when FWE = 1, SWE = 1, and PSU = 1 are selected
Rev. 1.0, 02/00, page 133 of 1141
(Initial value)
(Initial value)
(Initial value)
(Initial value)