Hitachi H8S/2199 Hardware Manual page 231

Single-chip microcomputer

Table of Contents

Table 10.16 shows the port 4 pin states in each operation mode.

Table 10.16 Port 4 Pin States

Note: If the RPTRG input pin is set, the pin level must be set to the high or low level regardless of

the active mode or low power consumption mode. Note that the pin level must not reach an

intermediate level.

Because the FTIA, FTIB, FTIC, and FTID inputs always function, the alternative pin need be

set to the high or low level regardless of the active mode and low power consumption

Rev. 1.0, 02/00, page 217 of 1141