Clear Hardware Hg-Stats - Dell C9000 Series Reference Manual

clear hardware hg-stats

Clear traffic statistics from a HiGig port in a HiGig link bundle/port channel on a line-card or switch fabric
module (SFM) NPU.
C9000 Series
Syntax
clear hardware {sfm npu-id | linecard slot} hg-stats {port hg-port
—number | unit npu-id port hg-port—number}
Parameters
sfm npu-id
linecard slot
hg-stats {port hg-
port-number |
unit npu-id port
hg-port-number}
Defaults none
Command Modes EXEC Privilege
Command History
Version
9.9(0.0)
9.2.1.0
9.3.0.0
Example
Dell#clear hardware linecard 0 hg-stats unit 0 port 27
Dell#show hardware linecard 0 hg-stats unit 0 port 27
Higig Port Statistics:
HiGigabitEthernet 0/0/27,
Input Statistics:
pkts
Output Statistics:
Specify a switch SFM (spine) NPU by entering the keyword sfm
and SFM NPU ID. Valid SFM NPU IDs are 0 to 1.
Specify a line-card (leaf) NPU by entering the keyword
linecard and line-card slot. Valid slot numbers are 0 to 11.
Enter the keyword hg-stats to clear HiGig port statistics.
For an SFM NPU HiGig link bundle, specify only a HiGig port
number. Valid SFM hg-port-number values are 1 to 33.
For a line-card NPU HiGig link bundle, specify an NPU ID and a
HiGig port number. Line-card NPU value is 0. Line-card HiGig
port numbers range from 27 to 32.
Description
Introduced on the C9010.
Introduced on the Z9500 .
Added support for the hg-stats option on the Z9000 platform.
0 packets, 0 bytes
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte
0 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Interfaces 1032